JHVP - High Power Vertical Dipole

JHVP

Vertical Dipole FM Broadcast Antenna Series

jvertdipThe JAMPRO Vertical Dipole Series of antennas are vertically polarized sidemount FM antenna systems consisting of balun fed vertical dipole and rigid coaxial feed lines. JAMPRO Vertical Dipole antennas are constructed of durable non-corrosive brass and copper. All associated brackets and hardware are made of stainless steel or hot dipped galvanized steel for many years of dependable service. The JHVP vertical dipole array has a 3-1/8" interbay feed system and has a safe input rating of up to 40 KW. The JAMPRO vertically polarized FM arrays are completely assembled and factory tuned on similar tower structures to insure proper impedance match and minimum VSWR. As an option, the circularity of the azimuth pattern can also be measured on JAMPRO's 7,000 ft. open field test range to determine the effect of the mounting structure on the antenna pattern. Custom directional patterns and reduced RFR arrays are also available.

  • Excellent Performance for Stereo and SCA Operation
  • Excellent VSWR Bandwidth
  • Rugged Mechanical Construction and Mounting
  • Vertically Polarized
  • Frequency Range 88-108 MHz
  • Factory Tuned on a similar Mounting Structure
  • DC Grounded at Every Bay for Maximum Lightning Protection
  • Made With Marine Brass and Copper for Long-Lasting Perfomance
  • Optional Radomes Available
  • FCC Directionalization Available
JAMPRO Vertical Dipole FM Broadcast Antenna Series
# of Bays Power Gain Gain (dB) Weight (lbs) Windload (lbs)
1 .92 -0.37 103 157
2 2.0 3.0 217 363
3 3.0 4.76 331 570
4 4.2 6.22 444 776
5 5.4 7.31 558 982
6 6.4 8.05 672 1188
8 8.6 9.34 900 1601
10 11.0 10.4 1127 2013
12 13.2 11.2 1355 2425


Notes:

  1. Weights and windloads shown are based on JMPV. Contact manufacturer for JLVP and JHVP weights and windloads.
  2. Feed points, when end fed, 3 ft. below bottom bay. 8 ft. below center when center fed.
  3. All inputs EIA flange, female.
  4. Maximum input power rating: JLVP-1KW; JMVP-10 KW; JHVP-40KW. Power derating occurs over 2,000 ft. elevation. Contact manufacturer for details.
  5. Power dB gains are typical for vertical components.
  6. Other combinations of EIA inputs and power ratings available.
  7. Free space azimuth circularity is +/- 1 dB.
  8. Custom mounting brackets available.
  9. Power gain is based on half-wave dipole in free space.
  10. Weights and windloads calculated at 50/33 psf, 112 mph wind speed, no ice.
  11. Weights and windloads include antenna, feed system and mounting brackets.
  12. Weights and windloads do not include reflectors.

All specifications subject to change.