Jampro Technical Questionnaire - Jampro Antennas Inc.

Name *

First

Last

Name of Company? *

Your Company Name?

Project Country *

Please indicate the project country?

Your Email Address? *

Email

Confirm Email

Please enter your email address and confirm it.

Your Cellular/Mobile Number: *

Please include your country code and number?

1. Your Project Reference? *

Please provide your own project reference?

2. Project Timescale? *

Please indicate your project timescale in Weeks/Months and if urgent?

3. Antenna Frequency Band? *

Please advise the required Frequency Band?

4. No. of Antennas Required?

Please advise the number of antennas required for your project(s).

5. Antenna Bays/Elements

Please select the number of Bays/Elements required?

6. ERP or Gain for each antenna. (dB or Watts/kW)

Please enter the ERP or Gain for each antenna. For more than one please separate each figure with a comma.

7. Gain Measurement Value

Measurement type in ERP or Gain.

8. Antenna Polarization?

Please confirm the required Polarization for your antenna?

9. Azimuth Pattern Options

Further details may be required.

10. No. of Transmitter Sites

Please select the number of transmitter sites in your project?

11. Transmitter Power Output (TPO)

Please advise the Transmitter Power Output for each transmitter. Please separate each with a comma if relevant?

12. Watts or Kilowatts

Please indicate the power level required?

13. Transmitter/Antenna Site Location (Google Maps)

For multiple transmitter sites please provide details in a separate email to [email protected]

14. Antenna Mounting

Please indicate the type of antenna mounting required? If more than one, please indicate in the Additional Information section.

15. Frequencies or Channels?

Please list the required frequencies and/or channels?

16. Transmitter Power into Half an Antenna (if applicable)

Please enter the transmitter power output level?

17. Watts or Kilowatts

Please indicate the power level.

18. Beam Tilt ( 0-8 Degrees)

Please indicate the Beam Tilt required for your antenna. For multiple antennas please indicate in the Additional Information box.

19. Null Fill (0-30 Degrees)

Please select your Null Fill requirement? If different for multiple antennas, please indicate in the Additional Information box, or please email us.

20. Feeder Type

Please indicate the required feeder type?

21. Transmission Feeder Length?

Please enter the required feeder length.

22. Feeder length measurement unit

Please select the feet or meters measurement unit.

23. Connector Size to Transmitter

Please select the required transmitter connector size.

24. Antenna Connector Size

Please select the required antenna connector size.

25. Deicing Required?

Please indicate if your antennas are likely to suffer from severe weather conditions and if deicing is required?

26. Radome Required?

Please advise if Radome protection is required?

27. Is a Switching Frame Required?

Please indicate if a Switching Frame is Required?

28. Is a Combiner/Filter Required?

Please indicate if a Combiner/Filter is required?

29. Is a Dehydrator Required?

Please advise if a Dehydrator is required?

30. Do you require a Tower/Mast Proposal?

If required, this will require a separate discussion to establish your requirements.

31. Maximum Predicted Wind Speed?

Anticipated maximum wind speed tolerance required for antennas/tower?

32. Wind Speed Measurement?

Please indicate the measurement type.

33. Coverage Prediction Assistance Required?

Please advise if you need assistance with the predicted signal coverage?

34. Your Preferred Jampro Contact?

If you have a preferred Jampro contact, please enter their name and we will put you in touch.

Any additional information?

Please provide any additional information or notes you feel will help our analysis and a proposal?